TIG WELDING APPLICATIONS
The TIG process is particularly suitable when small thicknesses of material, starting from a few tenths of a millimetre, are to be welded. However, it is not possible to weld thicknesses over a few mm (2-3 mm for steels) with a single seam (hence, generally, it is not used to weld thicknesses greater than 5-6 mm). Therefore, considering low productivity, it is often used to make the first seam of a joint, while filling is subsequently carried out with higher productivity processes. Given the characteristics of its procedure, it can be used in any position and can be used for continuous or spot welding. It is not advisable to use this procedure in outdoor locations, as even a moderate wind can cause dispersion of the protective gas.
Accessories image resolution
Wear-resisting durable quality better
Good cable export quality
Each plasma torch cable meets export standards, conductivity,
Pure copper material
The connector is made of brass, which is not hot and has high
Enough square meters long
enough cablesEnsure that every plasma torch is a good torch with a few met
1.Welding torch nozzle
2.Welding torch switch
3.Welding torch handle
4.Welding torch connector
long Back Cap
Collet
Nozzle
Collet Body
Description | Reference N0. |
Flexible torch boby | WP26F |
Torch body | WP26 |
Flexible torch body w/valve | WP26FV |
Torch body w/valve | WP26V |
Handle | TIGCN |
Handle | TIGCN |
Snap on swith holder | BS-1 |
Snap on swith holder | BS-1S |
Handle, smooth | H-200 |
2pc.rubber power cable 12.5' | 46V28-2 |
2pc.rubber power cable 25' | 46V30-2 |
Cable Fitting 3/8-24 Thd | T-15PFA |
Optional 2 pc. power cable 12.5 | 57Y01-2 |
Optional 2 pc. power cable 25 | 57Y03-2 |
Gas hose 12.5' Braided | 45V09R |
45V10R | Gas hose 25' Braided |
Swith w/round button | SW-1 |
Handle,ribbed | H-200R |
Cable Fitting | D221.R |
Power cable adapter | 45V62 |